Hello Friends Welcome Again to Our Blog .Today we are going to Share you how to install / Flash Stock Rom / Firmware / Flash File / Custom Rom using using Smart Flash Tool (sp Flash Tool) on windows PC / computer.
Requirement: Before You do this Process Make Sure your Device / Smartphone have been at-least 50-60% (persent) of battery Charge to perform this flashing process.
Flash Stock ROM Firmware Using Smart Phone Flash Tool
1: => Now Follow Our Full process Very Carefully, You need to follow all steps Very Carefully .first of all you need to download Stock Rom / Flash File / firmware file on your PC / computer (according To your Device Model). Then extract Downloaded zip file on your PC / computer Using 7zip / Winrar / Or any winrar applications . Then you need to download SP Flash Tool (Smart Phone Flash Tool), and MAUI IMEI tool and install both tool on your PC / computer..
2: => When Step 1 Done then follow Step 2 . Then download USB driver (According to your Device Model) in your PC / computer and install USB Driver.
3:=> Now switch off your Android Device / smartphone and remove the battery (If it is removable Battery Then Remove Battery Otherwise Only Power off your Device).
4:=> Then go to extracted Firmware file folder (Check Step 1) and Then Find and open Flash tool folder then open folder and find SP Flash Tool in sub-folder. Then You will find “Flash_tool.exe” file in SP Flash Tool Folder.
5:=> Now when Open SP Flash tool, click & Select on “Download” tab. as shown in the below screenshot.
6:=> Now Find & click on “scatter-loading” in the download tab on SP flash Tool.
7:=> Then Open extracted firmware folder and Select select the scatter file “Scatter.txt”. as shown in the below screenshot.
8:=> Then click on “Download” button to start Stock Rom / Firmware / Flash File flashing process on your Device..
9:=> Now connect your device to your PC / computer through working good condition USB cable press & hold volume up or volume down button.(according to your Device Boot Key).
10:=> Then your Device detect on PC and now your Device Flashing will be Start.. Now Wait for finish ..It will Take Some times ..So don’t panic., Once your Device Flashing will be Completed then you will see the “Download OK” Pic on in SP Flash Tool. as shown in the below screenshot
11:=> Then Disconnect your Device and Close SP Flash Tool and then Power On your Mtk Device.
Done ..If you follow this Process carefully so you have Successfully Flashed your Device.. But if you Face any problem while you try to flash your Device then without any hesitation do Comment on post Comment Section or Contact Us .. Our Team Always Ready to Help you..
IF i help You please Share this Post on Facebook / Twitter / WhatsApp..
|READ ME :-