Hello Friends Welcome Again to Our Blog .Today we are going to Share you how to install / Flash Stock Rom / Firmware / Flash File / Custom Rom using SPD Flash Tool / SPD Upgrade Flash Tool on windows PC / computer.
Pre-requirements:- Before You do this Process Make Sure your Device / Smartphone have been at-least 50-60% (persent) of battery Charge to perform this flashing process.
Flash Stock ROM Firmware Using SPD Upgrade Tool
1: => Now Follow Our Full process Very Carefully, You need to follow all steps Very Carefully .first of all you need to download Stock Rom / Flash File / firmware file on your PC / computer (according To your Device Model). Then extract Downloaded zip file on your PC / computer Using 7zip / Winrar / Or any winrar applications . Then you need to download SPD Upgrade Tool (SPD Flash Tool), and SPD IMEI tool and install both tool on your PC / computer.
2: => When Step 1 Done then follow Step 2 . Then download USB driver (According to your Device Model) in your PC / computer and install USB Driver. When done then run the SPD Upgrade Tool / SPD Flash Tool by clicking on “ResearchDownload.exe” file.
3:=> When the SpreadTrum upgrade tool / SPD Flashing tool fully is launched, Then click on “Load Pocket” as shown in the below screenshot.
4:=> Then choose the Stock Rom / Flash File/ firmware file / Custom Rom and then click on “Open” as shown in the below screenshot.
5:=> When the Stock Rom / Flash File/ firmware file / Custom Rom is loaded in the SPD Flash tool / SPD Upgrade Tool ,Then connect your SPD Android device to the PC / computer using original USB cable. Next, Then click on the “Start Downloading” button to Start flashing process.
6:=> Flashing will Take Some time to Complete Firmware / Flash file / Stock Rom flashing process,
7:=> When the Firmware / Flash file / Stock Rom flashing process is Done , Then you will see a Massage => “Previous Passed” e in green color as shown in the below screenshot .
That’s it. Now if you follow our Process then you will Successfully flashed stock ROM /Flash file / firmware on your device..Now on your Device is fully power On Check all thinngs then Open Dialer Pad on your Device then Check your Device IMEI number by this Code *#06# . If your Device is Shown Imei Number is 0000 or Invalid or Blank then you need to repair IMEI your Device.. Repair IMEI First – But one Note IMEI Change is illegal in some Country ..We Do not Responsible any DemageOn your So we just Repair IMEI Using IMEI tool provided in the firmware file / Stock Rom / Flash File and Repair original IMEI of device. When done, Disconnect your device from the PC / computer.
If you encounter any issues while you following this Flash file / Stock Rom /firmware Flashing tutorial, do let me know via comments Or Contact Us page..
IF i help You please Share this Post on Facebook / Twitter / WhatsApp..
READ ME :-
|