How to use Asus Zenfone Flash Tool

0
26

Hello Friends  Welcome Again to Our Blog .Today we are going to Share you how to install / Flash Stock Rom / Firmware / Flash File /  using Asus Flash Tool  / Asus Zenfone Flash Tool  for your Asus Zenfones devices on windows PC / computer.

 

Pre-requirements:- Before You  do this Process Make Sure your Device / Smartphone have been at-least 50-60% (persent) of battery Charge to perform this flashing process.

 

How to use Asus Zenfone Flash Tool

1: => Now Follow Our Full process Very Carefully, You need to follow all steps Very Carefully .first of all you need to download Stock Rom / Flash File / firmware file on your PC / computer (according To your Device Model). Then extract  Downloaded zip file on your PC / computer Using 7zip / Winrar / Or any winrar applications . Then you need to  download Asus Zenfone Flash Tool , and Asus Zenfone USB Driver and install both tool  on your PC / computer.

2: =>  When Step 1 Done then follow Step 2 . Then download USB driver (According to your Device Model) in your PC / computer and install USB Driver. When done then run the Asus Zenfone Flash Tool.exe by clicking on “Flashtool.exe” file. then install Asus Zenfone Flash tool.exe

 

 

3:=>  When the Asus Zenfone Flash Tool is installed  fully is installed, Then  Open Asus Zenfone Flash tool.exe as shown in the below screenshot.

4.=>After launched successfully your Asus Zenfone Flash tool , you will be able see the Screen type below.

5.=>Now Power Off your Device and connect your Asus Zenfone Smartphone or tablet to the PC.

6.=>Now, Click On “Disconnected” Button to connect your device to the Asus Zenfone tool.

7.=>Now ,you Can See your Device is Successfully Connected,Now you can see connected with green light.

 

8.=>Now Click Browse Button and Select the firmware for your Asus Zenfone Device,

9.=>Once your Device firmware is loaded click on Start Button to flashing Started your Device.

 

10.=> Now Press and hold down and Volume Up key to boot into recovery Mode.

11.=>Now under the recovey mode select apply update from ADB.

12.=>now Click on Resume Button to Rusume Flashing process of your Zenfone Devices.

13=>When Flash finish ,Disconnect your Device to Pc and Power On Your Device..

 

Flashing May take upto 6-15minutes to completed ..

 

IF i help You please Share this Post on Facebook / Twitter / WhatsApp..

READ ME :-

  • Before you Flash Stock Rom / Flash file / Firmware file  on your Android Device Please take a backup first all your personal Data .
  • Your Personal all data will be remove if you follow this process .
  • If you want to flash your Device , So you Need to download Stock Rom / Firmware / Flash File for your Device . So we thought anfd Share you a Very good Website for Download all mobile firmware / flash file / Stock Rom .Download Stock Rom.
  • SPD Flash Tool Created and Distributed By SPD Chipsets.Inc so Full Credit Goes to them.
  • If you Want to learn More About SPD Chipsets So Visit Here.